BMW Manufacturing Introduces Hydrogen Fuel Cell Material Handling Equipment
BMW Manufacturing Co. announced today that it is implementing a new alternative fuel platform to use Hydrogen Fuel Cells to power their material handling equipment. Hydrogen fuel cell-powered forklifts, tuggers and stackers will be used in BMW’s new assembly hall that produces the new BMW X3 Sports Activity Vehicle®.
Fuel cells take stored chemical energy, such as hydrogen in this case, and convert it into electrical energy through two internal electrochemical reactions. The only byproducts of hydrogen fuel cells are heat and water, making this energy choice more efficient than other more conventional energy sources.
“BMW has taken another important step to affirm our global commitment to sustainability with a project such as this in Spartanburg,” said Josef Kerscher, President of BMW Manufacturing. “There’s a clear vision and determination to reach our goal of using renewable energy as much as possible throughout the plant site.”
Implementation of this new technology has been done in concert with partners from Linde North America and Plug Power.
Mike Beckman, vice president of Linde’s alternative energy team, said, “We have partnered with BMW to work toward our companies’ shared goal of implementing cost-effective, alternative energy solutions that reduce emissions. BMW’s selection of Linde to supply the hydrogen and fueling system is testament to our significant capabilities, leading technologies and dedicated professionals who worked closely with BMW to implement the fueling solution.”
“We are proud BMW has selected to work with Plug Power as they continue to solidify their position as a leading sustainable automotive manufacturer,” said Andy Marsh, CEO of Plug Power Inc. “The proven productivity increases on the manufacturing floor through the use of GenDrive will give BMW a further competitive advantage in the global automotive marketplace.”
Installation of a storage and distribution center within BMW’s existing Energy Center, an 11 Megawatt facility, along with six on-site fueling stations were recently completed by BMW at their only North American manufacturing facility in South Carolina.The hydrogen used for this project was manufactured at the most sustainable source within Linde’s network.
Initially, the hydrogen-powered material handling fleet will consist of more than 85 pieces of equipment, making it one of the largest hydrogen fuel-cell fleets in the U.S. In addition to the many other benefits, fuel cells offer a much longer operating life than lead-acid batteries. Fuel cells provide continuous power with no loss of power as the tank nears empty as opposed to battery-powered equipment that run slower as the battery nears empty. These units, when full, run on a 2 kilogram fuel tank and run for 8-10 hours. Fuel cell units can be refueled by a driver in less than three minutes at an on-site hydrogen fueling station. On average, it takes about 20 minutes to re-fuel a depleted battery.
Since hydrogen is the only source of energy for the fuel cells being used in the new facility, BMW Manufacturing estimates that this project will avoid 1.8 million kilowatt hours per year of electricity consumption at the plant that would have been used to charge a battery-powered fleet.
The Hydrogen Fuel Cell fleet is the perfect complement to BMW’s successful Landfill Gas to Energy initiative started in early 2003. BMW powers approximately 50% of the plant’s total energy requirements using methane from a local landfill, a previously wasted resource.
Implementation of the landfill gas program reduces CO2 emissions by 92,000 tons per year. To date, the landfill gas project has saved BMW an annual average of $5 million in energy costs.
BMW Manufacturing Co.
BMW Manufacturing Co. is a subsidiary of BMW AG in Munich, Germany and is the global producer of the BMW X5 and X3 Sports Activity Vehicles and X6 Sports Activity Coupe. In addition to the South Carolina manufacturing facility, BMW North American subsidiaries include sales, marketing and financial services operations in the United States, Canada and throughout Latin America; and a design firm and technology office in California. For more information on BMW Manufacturing, visit www.bmwusfactory.com.
BMW Group In America
BMW of North America, LLC has been present in the United States since 1975. Rolls-Royce Motor Cars NA, LLC began distributing vehicles in 2003. The BMW Group in the United States has grown to include marketing, sales, and financial service organizations for the BMW brand of motor vehicles, including motorcycles, the MINI brand, and the Rolls-Royce brand of Motor Cars; DesignworksUSA, a strategic design consultancy in California; a technology office in Silicon Valley and various other operations throughout the country. BMW Manufacturing Co., LLC in South Carolina is part of BMW Group’s global manufacturing network and is the exclusive manufacturing plant for all X5 and X3 Sports Activity Vehicles and X6 Sports Activity Coupes. The BMW Group sales organization is represented in the U.S. through networks of 338 BMW passenger car centers, 336 BMW Sports Activity Vehicle centers, 143 BMW motorcycle retailers, 100 MINI passenger car dealers, and 31 Rolls-Royce Motor Car dealers. BMW (US) Holding Corp., the BMW Group’s sales headquarters for North America, is located in Woodcliff Lake, New Jersey.
Information about BMW Group products is available to consumers via the Internet at: www.bmwgroupna.com.